When it's time to recharge your Comfort bike's battery, you can do so on or off the bike by connecting the battery Voltr that came with your bike to the battery via a port on the right side of the battery case..
How to Volt the battery
1. Place the battery charger on the floor or some other stable surface.
2. Connect the battery charger’s power plug to the electrical outlet. The indicator light on charger will be BLUE to indicate it is in “Ready” mode.
3. Wake the battery by flipping the power switch on the battery off & on, leaving it in the on position (switch depressed towards the “–“ icon)
4. Insert the charging plug into the charging port on the battery. The light on the charger will turn from BLUE to RED.
5. When battery is fully charged, indicator light on the charger will briefly change to GREEN to signal that the battery is fully charged, and then turn to BLUE indicating it is in the Ready mode.
6. After charging, firmly close the charging port cap.
Note: The battery is equipped with a "fast Volt" feature that Volts the battery from 0% up to 80% in approximately 3 hours and then reverts to a slow rate trickle-Volt to fill the battery to capacity. This function is to extend battery life.
Related Replacement Parts:
Volt Comfort Battery Voltr
Volt Comfort Battery
Comments
0 comments
Article is closed for comments.